短周期電弧螺柱焊用焊接螺柱 - IS型，內螺紋螺柱 GB /T 10433 (IS) - 2024
| 選擇規格尺寸 點擊↓ M3 M4 M5 M5 M6 |
尺寸單位:
mm
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,a°≈166°±2°；對于使用厚度≥2mm且焊接時間> 60 ms的應用，角度a可減小至152° ②,L2（焊后長度）由L1及焊接能量確定。 |
等效標準
| 國標 GB | 國際 ISO |
|---|---|
| GB /T 902.4(IS) | ISO 13918(IS) |
以上有部分標準可能為近似等效，如有異議以標準原件為準
引用參考 (3)
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息 (46)
| 1 |
|
[國標] GB /T 10433 (PT) - 2024 |
儲能焊用焊接螺柱 - PT型，螺紋焊接螺柱
Stud Welding with Tip Ignition - Threaded Stud - Type PT 供應商(5) |
| 2 |
|
[國標] GB /T 10433 (PD) - 2024 |
電弧螺柱焊用螺柱 - PD型，半牙螺柱
Stud for Arc Stud Welding - Partially Threaded Stud - Type PD 供應商(2) |
| 3 |
|
[國標] GB /T 10433 (RD) - 2024 |
電弧螺柱焊用螺柱 - RD型，帶縮桿的螺紋螺柱
Stud for Arc Stud Welding - Threaded Stud with Reduced Shaft - Type RD 供應商(1) |
| 4 |
|
[國標] GB /T 10433 (ID) - 2024 |
電弧螺柱焊用螺柱 - ID型，內螺紋螺柱
Stud for Arc Stud Welding - Stud with Internal Thread - Type ID 供應商(1) |
| 5 |
|
[國標] GB /T 10433 (IT) - 2024 |
儲能焊用焊接螺柱 - IT型，帶內螺紋螺柱
Stud Welding with Tip Ignition - Stud with Internal Thread - Type IT 供應商(1) |
| 6 |
|
[國標] GB /T 10433 (PS) - 2024 |
短周期電弧螺柱焊用焊接螺柱 - PS型，帶法蘭的螺紋螺柱
Short-cycle Drawn Arc Stud Welding - Threaded Stud with Flange - Type PS 供應商(1) |
| 7 |
|
[國標] GB /T 902.2 (PD) - 2010 |
PD型電弧焊用焊接螺柱
Threaded Studs for Drawn Arc Stud Welding with Ceramic Ferrule - PD Style 供應商(2) |
| 8 |
|
[國標] GB /T 902.2 (RD) - 2010 |
RD型電弧焊用焊接螺柱
Threaded Studs for Drawn Arc Stud Welding with Ceramic Ferrule - RD Type 供應商(1) |
| 9 |
|
[國標] GB /T 902.1 - 2008 |
手工焊用焊接螺柱
Weld Studs for Manual Welding 供應商(7) |
| 10 |
|
[國標] GB /T 902.3 (PT) - 2008 |
PT型焊接螺柱
Weld Studs For Capacitor Discharge Welding - Type PT 供應商(5) |
| 11 |
|
[國標] GB /T 902.1 - 1989 |
手工焊用焊接螺柱
Weld Studs for Manual Welding 供應商(7) |
| 12 |
|
[國標] GB /T 902.2 - 1989 |
機動弧用焊接螺柱
Weld Studs for Arc Welding 供應商(1) |
| 13 |
|
[國標] GB /T 902.3 (PT) - 1989 |
儲能焊用焊接螺柱
Weld Studs for Capacitor Discharge Welding 供應商(5) |
| 14 |
|
[國標] GB /T 10433 (FD) - 2024 |
電弧螺柱焊用螺柱 - FD型，全螺紋螺柱
Stud for Arc Stud Welding - Fully Threaded Stud - Type FD |
| 15 |
|
[國標] GB /T 10433 (MD) - 2024 |
電弧螺柱焊用螺柱 - MD型，近全螺紋螺柱（MPF）
Stud for Arc Stud Welding - Virtually Fully Threaded Stud (MPF) - Type MD |
| 16 |
|
[德標] DIN 34828 - 2005 |
單頭焊接螺柱
Welding Studs for Turnbuckles 供應商(1) |
| 17 |
|
[德標] DIN 525 - 2009 |
焊接螺柱
Weld Studs |
| 18 |
|
[德標] DIN 32500 (-5)1991 |
氣體保護焊焊接柱 快速螺柱焊接用帶凹槽螺柱 帶凸肩的螺柱(GK)
Studs for Drawn Arc Stud Welding - Threaded Studs with Shoulder, Short Cycle Processes, GK |
| 19 |
|
[德標] DIN 525 - 1986 |
焊接螺柱
Weld Studs |
| 20 |
|
[國際] ISO 13918 (MD) - 2017 |
電弧螺柱焊用螺柱 - MD型，近全螺紋螺柱（MPF）
Stud for Arc Stud Welding - Virtually Fully Threaded Stud (MPF) - Type MD 供應商(1) |
| 21 |
|
[國際] ISO 13918 (PD) - 2017 |
電弧螺柱焊用螺柱 - PD型，半牙螺柱
Stud for Arc Stud Welding - Partially Threaded Stud - Type PD 供應商(2) |
| 22 |
|
[國際] ISO 13918 (RD) - 2017 |
電弧螺柱焊用螺柱 - RD型，帶縮桿的螺紋螺柱
Stud for Arc Stud Welding - Threaded Stud with Reduced Shaft - Type RD 供應商(1) |
| 23 |
|
[國際] ISO 13918 (ID) - 2017 |
電弧螺柱焊用螺柱 - ID型，內螺紋螺柱
Stud for Arc Stud Welding - Stud with Internal Thread - Type ID 供應商(1) |
| 24 |
|
[國際] ISO 13918 (PT) - 2017 |
儲能焊用焊接螺柱 - PT型，螺紋焊接螺柱
Stud Welding with Tip Ignition - Threaded Stud - Type PT 供應商(4) |
| 25 |
|
[國際] ISO 13918 (IT) - 2017 |
儲能焊用焊接螺柱 - IT型，帶內螺紋螺柱
Stud Welding with Tip Ignition - Stud with Internal Thread - Type IT 供應商(1) |
| 26 |
|
[國際] ISO 13918 (PD) - 2008 |
電弧螺柱焊用螺柱 - PD型，半牙螺柱
Stud for arc stud welding - Partially Threaded Stud - Type PD 供應商(2) |
| 27 |
|
[國際] ISO 13918 (RD) - 2008 |
RD型電弧焊用焊接螺柱
Threaded Studs for Drawn Arc Stud Welding With Ceramic Ferrule - RD Type 供應商(1) |
| 28 |
|
[國際] ISO 13918 (PD) - 1998 |
PD型，螺紋螺柱
Threaded Studs(PD) 供應商(2) |
| 29 |
|
[國際] ISO 13918 (RD) - 1998 |
RD型，帶縮桿的螺紋螺柱
Threaded Stud with Reduced Shaft (RD) 供應商(1) |
| 30 |
|
[國際] ISO 13918 (PT) - 1998 |
PT型，螺紋焊接螺柱
Threaded Stud (PT) 供應商(4) |
| 31 |
|
[國際] ISO 13918 (IT) - 1998 |
IT型，內螺紋焊接螺柱
Stud with Internal Thread for Arc Stud Welding (IT) 供應商(1) |
| 32 |
|
[國際] ISO 13918 (FD) - 2017 |
電弧螺柱焊用螺柱 - FD型，全螺紋螺柱
Stud for Arc Stud Welding - Fully Threaded Stud - Type FD |
| 33 |
|
[國際] ISO 13918 (PS) - 2017 |
短周期電弧螺柱焊用焊接螺柱 - PS型，帶法蘭的螺紋螺柱
Short-cycle Drawn Arc Stud Welding - Threaded Stud with Flange - Type PS |
| 34 |
|
[國際] ISO 13918 (US) - 2017 |
短周期電弧螺柱焊用焊接螺柱 - US型，無螺紋螺柱（無頭焊釘）
Short-cycle Drawn Arc Stud Welding - Unthreaded Stud - Type US |
| 35 |
|
[國際] ISO 13918 (IS) - 2017 |
短周期電弧螺柱焊用焊接螺柱 - IS型，內螺紋螺柱
Short-cycle Drawn Arc Stud Welding - Stud with Internal Thread - Type IS |
| 36 |
|
[國際] ISO 13918 (UD) - 1998 |
UD型，無螺紋螺柱
Unthreaded Studs(UD) |
| 37 |
|
[國際] ISO 13918 (FD) - 1998 |
FD型，帶法蘭的螺紋螺柱
FD Weld Screws |
| 38 |
|
[國際] ISO 13918 (UT) - 1998 |
UT型，無螺紋螺柱
Unthreaded Stud for Arc Stud Welding (UT) |
| 39 |
|
[汽標代號] Q 114 |
短周期弧焊焊接螺柱
Short-Cycle Drawn Arc Welding Studs 供應商(1) |
| 40 |
|
[汽標代號] Q 110 |
手工焊接用焊接螺柱
Weld Studs for Manual Welding |
| 41 |
|
[汽標代號] Q 118 |
塑料用焊接螺柱
Welding Studs for Plastic |
| 42 |
|
[法國] NF E 27-801 - 1970 |
帶螺紋端的焊接桿
Weld Rod with Screwed End |
| 43 |
![米制種焊螺柱 [原YJT 1038]](https://imgccc.164580.com/upload/48/pic/2019/08/23/1566522542812059925.jpg)
|
YJT 1004 |
米制種焊螺柱 [原YJT 1038]
Metric Spot Welding Stud [Previously YJT 1038] |
| 44 |
|
[汽標] QC /T 869 - 2011 |
短周期弧焊焊接螺柱
Short-Cycle Drawn Arc Welding Studs 供應商(1) |
| 45 |
|
[汽標] QC /T 857 - 2011 |
焊接螺柱
Weld Studs |
| 46 |
|
[汽標] QC /T 881 - 2011 |
塑料用焊接螺柱
Welding Studs for Plastic |
標準編號 / Standard Code：
GB /T 10433 (IS) - 2024
中文名稱 / Chinese Name： 短周期電弧螺柱焊用焊接螺柱 - IS型，內螺紋螺柱
英文名稱 / English Name： Short-cycle Drawn Arc Stud Welding - Stud with Internal Thread - Type IS
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
中文名稱 / Chinese Name： 短周期電弧螺柱焊用焊接螺柱 - IS型，內螺紋螺柱
英文名稱 / English Name： Short-cycle Drawn Arc Stud Welding - Stud with Internal Thread - Type IS
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
Data Source:
YJT Fastener Database (164580.com)
Standard: GB /T 10433 (IS) - 2024
Chinese Name: 短周期電弧螺柱焊用焊接螺柱 - IS型，內螺紋螺柱
English Name: Short-cycle Drawn Arc Stud Welding - Stud with Internal Thread - Type IS
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
Standard: GB /T 10433 (IS) - 2024
Chinese Name: 短周期電弧螺柱焊用焊接螺柱 - IS型，內螺紋螺柱
English Name: Short-cycle Drawn Arc Stud Welding - Stud with Internal Thread - Type IS
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
© 易緊通 服務熱線：4006-164580（免長途費）