| 選擇規格尺寸 點擊↓ 0.2500 -32 UNEF-1A |
尺寸單位:
inch
|
|
|
|||||||||||||||||||
|
|
||||||||||||||||||
| ①,材料:應采用符合 QQ-A-225/3 標準的 2011-T3 鋁合金。 ②,套環和法蘭 表面處理:按 MIL-A-8625 進行陽極氧化處理。顏色應符合 FED. STD. 595 的規定,采用商業陽極氧化工藝,在實際工藝條件允許的情況下,盡可能接近以下顏色編號: -3:黑色無光(Black Lusterless),#37038 -6:灰色無光(Gray Lusterless),#36231 |
| 1 |
|
[國標] GB 2159 - 1991 |
機床夾具零件及部件 - 旋入式螺紋襯套
The Parts and Units of Jigs and Fixtures - Rotation-in Threaded Bush |
| 2 |
|
[日標] JIS B 2301 (A14) - 2013 |
螺紋型可鍛鑄鐵管件 - 襯套
Screwed Type Malleable Cast iron Pipe Fittings - Class I Bushings |
| 3 |
|
[機械行業] JB /T 1308.11 - 2011 |
PN 250MPa 內外螺套
PN2500 Ultrahigh Pressure Valves and Fittings - Threaded Collars |
| 4 |
|
[機械行業] JB /T 1308.7 - 2011 |
PN2500 超高壓閥門和管件 第7部分:螺套
PN2500 Ultrahigh Pressure Values and Fittings - Part 7 : Threaded Collars |
| 5 |
|
[機械行業] JB /T 1308.11 - 1999 |
PN 250MPa 內外螺套
Internal and External Wire Thread Insert |
| 6 |
|
[機械行業] JB /T 1380.7 - 1999 |
PN 250MP螺套-左牙
Wire Thread Insert-teeth - Left |
| 7 |
|
[機械行業] JB /T 8005.2 - 1999 |
旋入式螺紋襯套
Rotation-in Threaded Bush |
| 8 |
|
[建筑] JG /T 163 - 2013 |
鋼筋機械連接用直螺紋套筒
Parallel Threaded Coupler for Rebar Mechanical Splicing |
| 9 |
|
[建筑] JG /T 163 - 2013 |
鋼筋機械連接用錐螺紋套筒
Taper Threaded Coupler for Rebar Mechanical Splicing |
| 10 |
|
[美國軍標] MS 3498C (2) - 1998 |
面板螺釘用襯套
Collar |
| 11 |
|
[航空] HB 401 - 1971 |
帶肩螺紋襯套 |