中部帶1/3全長平行溝槽的槽銷 NF E 25-763 - 1997 (R2002)
| 選擇規格尺寸 點擊↓ Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25 |
尺寸單位:
mm
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| d1 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,槽角應根據材料的變形量由工藝確定；對易切鋼制成的槽銷，槽角≈70°。 |
引用參考 (3)
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息 (54)
| 1 |
|
[國標] GB /T 13829.1 - 2004 |
槽銷 帶導桿及全長平行溝槽
Grooved Pin, Full Length Parallel Grooved with Pilot 供應商(2) |
| 2 |
|
[國標] GB /T 13829.2 - 2004 |
槽銷 帶倒角及全長平行溝槽
Grooved Pin, Full Length Parallel Grooved with Chamfer 供應商(3) |
| 3 |
|
[國標] GB /T 13829.3 - 2004 |
槽銷 中部槽長為1/3全長
Grooved Pins-One-Third-Length Centre Grooved 供應商(3) |
| 4 |
|
[國標] GB /T 13829.4 - 2004 |
槽銷 中部槽長為1/2全長
Grooved Pins - Half-Length Centre Grooved 供應商(1) |
| 5 |
|
[國標] GB /T 13829.1 (A) - 1992 |
A型-帶導桿及全長平行溝槽的槽銷.
Grooved Pin, Full Length Parallel Grooved with Pilot 供應商(2) |
| 6 |
|
[國標] GB /T 13829.1 (B) - 1992 |
B型-帶倒角及全長平行溝槽槽銷.
Grooved Pins-full-length Parallel Grooved, with Chamferw 供應商(3) |
| 7 |
|
[國標] GB /T 13829.1 (C) - 1992 |
C型-中部帶1/3全長平行溝槽的槽銷
Grooved Pins-one-third-length Centre Grooved 供應商(3) |
| 8 |
|
[國標] GB /T 13829.1 (D) - 1992 |
D型中部帶1/2全長平行溝槽的槽銷
Grooved Pins - Half-length Centre Grooved 供應商(1) |
| 9 |
|
[德標] DIN 1469 - 2012 |
帶頸配合槽銷，溝槽長為全長1/2
Grooved Pins, Half Length Grooved with Gorge 供應商(1) |
| 10 |
|
[德標] DIN 1469 - 2011 |
帶頸配合槽銷
Grooved Pins, Half Length Grooved with Gorge 供應商(1) |
| 11 |
|
[德標] DIN 1469 - 1978 |
帶頸配合槽銷
Grooved Pins, Half Length Grooved with Gorge 供應商(1) |
| 12 |
|
[德標] DIN 1470 - 1978 |
帶導桿及全長平行溝槽的槽銷
Grooved pin, full length parallel grooved with pilot 供應商(1) |
| 13 |
|
[德標] DIN 1473 - 1978 |
帶倒角及全長平行溝槽的槽銷
Grooved Pins, Full Length Parallel Grooved with Chamfer 供應商(2) |
| 14 |
|
[德標] DIN 1475 - 1978 |
槽銷，中部槽長為1/3全長
Grooved Pins - 1/3 Length Centre Grooved 供應商(2) |
| 15 |
|
[國際] ISO 8742 (RN) - 2026 |
中部帶1/3全長平行溝槽的槽銷，圓頭端
Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN) 供應商(1) |
| 16 |
|
[國際] ISO 8739 (RN) - 2025 |
帶導桿及全長平行溝槽, 倒圓端
Pin with Pilotpoint and Rounded Ends 供應商(1) |
| 17 |
|
[國際] ISO 8740 (RN) - 2025 |
帶倒角及全長平行溝槽槽銷-倒圓端
? Pin with chamfered point and rounded ends (RN) 供應商(2) |
| 18 |
|
[國際] ISO 8739 - 1997 |
槽銷—帶導桿及全長平行溝槽
Grooved Pins-Full-Length Parallel Grooved, with Pilot 供應商(1) |
| 19 |
|
[國際] ISO 8740 - 1997 |
帶倒角及全長平行溝槽槽銷
Grooved Pins-Full-Length Parallel Grooved, with Chamfer 供應商(2) |
| 20 |
|
[國際] ISO 8742 - 1997 |
中部帶1/3全長平行溝槽的槽銷
Grooved Pins-One-Third-Length Centre Grooved 供應商(1) |
| 21 |
|
[國際] ISO 8742 (CH) - 2026 |
槽銷，中部帶1/3全長平行溝槽，倒角端
Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH) |
| 22 |
|
[國際] ISO 8743 (RN) - 2026 |
中部帶1/2全長平行溝槽的槽銷 RN
Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN) |
| 23 |
|
[國際] ISO 8743 (CH) - 2026 |
中部帶1/2全長平行溝槽的槽銷 CH
Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH) |
| 24 |
|
[國際] ISO 13672 (RN) - 2025 |
槽銷 半長平行溝槽 末端倒圓
Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends |
| 25 |
|
[國際] ISO 13672 (CH) - 2025 |
槽銷 半長平行溝槽 末端倒角
Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends |
| 26 |
|
[國際] ISO 8739 (CH) - 2025 |
帶導桿及全長平行溝槽, 倒角端
Pin Pilot Point and with Chamfered Ends |
| 27 |
|
[國際] ISO 8740 (CH) - 2025 |
帶倒角及全長平行溝槽槽銷-倒角端
Pin with Both Chamfered Points (CH) |
| 28 |
|
[國際] ISO 8743 - 1997 |
中部帶1/2全長平行溝槽的槽銷
Grooved Pins-Half-Length Centre Grooved |
| 29 |
![米制 半長溝槽 槽銷 TYPE 43-1 / TYPE 43-2 [TABLE 5]](https://imgccc.164580.com/upload/48/pic/2019/02/27/1551237176514667107.jpg)
|
[美標] ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005) |
米制 半長溝槽 槽銷 TYPE 43-1 / TYPE 43-2 [TABLE 5]
Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5] |
| 30 |
|
[美標] ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005) |
米制 全長平行溝槽 槽銷 TYPE 39 / TYPE 40 [Table 3]
Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3] |
| 31 |
|
[美標] ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) |
米制 中部槽長1/3全長 平行溝槽 槽銷 TYPE 42 [TABLE 4]
Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4] |
| 32 |
|
[美標] ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) |
米制 中部帶1/2全長 平行溝槽 槽銷 TYPE 43 [TABLE 4]
Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4] |
| 33 |
|
[歐標] EN 28740 - 1992 |
槽銷 全長平行溝槽 帶倒角
Full-Length Parallel Grooved, with Chamfer |
| 34 |
|
[歐標] EN 28743 - 1992 |
中部帶1/2全長平行溝槽的槽銷
Grooved Pins - Half-Length Centre Grooved |
| 35 |
|
[法國] NF E 25-750 - 1997 |
中部帶1/2全長平行溝槽的槽銷
Grooved Pins. Half Length Centre Grooved |
| 36 |
|
[法國] NF E 25-761 - 1997 |
槽銷 帶導向的全長平行槽
Grooved Pins - Full-length Parallel Grooved, With Pilot |
| 37 |
|
[法國] NF E 25-772 - 1997 (R2002) |
帶倒角及全長平行溝槽的槽銷
Grooved Pins. Full Length Paralled Grooved, with Chamfer |
| 38 |
|
[美標] SAE J 494 (C) - 2004 |
C型 槽銷
Grooved Straight Pins - Type C |
| 39 |
|
[美標] SAE J 494 (E) - 2004 |
E型 槽銷
Grooved Straight Pins - Type E |
| 40 |
|
[美標] SAE J 494 (F) - 2004 |
F型 槽銷
Grooved Straight Pins - Type F |
| 41 |
|
[德標] DIN EN ISO 8739 - 1998 |
帶導桿及全長平行溝槽的槽銷
Grooved Pin, Full Length Parallel Grooved with Pilot 供應商(1) |
| 42 |
|
[德標] DIN EN ISO 8740 - 1998 |
帶倒角及全長平行溝槽的槽銷
Grooved Pins. Full-Length Parallel Grooved, with Chamfer 供應商(2) |
| 43 |
|
[德標] DIN EN ISO 8742 - 1998 |
槽銷，中部帶1/3全長平行溝槽
Grooved Pins - 1/3 Length Centre Grooved 供應商(2) |
| 44 |
|
[德標] DIN EN ISO 8743 - 1998 |
槽銷 中部槽長為1/2全長
Grooved Pins - Half-Length Centre Grooved |
| 45 |
|
[歐標] EN ISO 8743 - 1997 |
中部帶1/2全長平行溝槽的槽銷
Grooved Pins - Half-Length Centre Grooved |
| 46 |
![F型全長槽銷 [Table 8-1]](https://imgccc.164580.com/upload/48/pic/2021/04/30/1619770101164760012.jpg)
|
[美標] ASME B 18.8.2 - 2020 |
F型全長槽銷 [Table 8-1]
Grooved Pins - Type F |
| 47 |
![H型半長槽銷 [Table 8 -1]](https://imgccc.164580.com/upload/48/standard/2021/06/16/f2_1623811237.jpg)
|
[美標] ASME B 18.8.2 - 2020 |
H型半長槽銷 [Table 8 -1]
Grooved Pins - Type H |
| 48 |
|
[美標] ASME B 18.8.2 - 2020 |
G型槽銷 [Table 8 -1]
Grooved Pins - Type G |
| 49 |
|
[美標] ASME B 18.8.2 - 2020 |
E型槽銷 半長錐槽 [Table 8 -1]
Grooved Pins - Type E |
| 50 |
![H型半長槽銷 [Table 6]](https://imgccc.164580.com/upload/48/standard/2015/04/22/1429664377056588272.jpg)
|
[美標] ASME B 18.8.2 - 2000 (R2010) |
H型半長槽銷 [Table 6]
Grooved Pins - Type H |
| 51 |
|
[美標] ASME B 18.8.2 - 2000 (R2010) |
E型槽銷 半長錐槽 [Table 6]
Grooved Pins - Type E |
| 52 |
|
[美標] ASME B 18.8.2 - 2000 (R2010) |
F型全長槽銷 [Table6]
Grooved Pins - Type F |
| 53 |
|
[美標] ASME B 18.8.2 - 2000 (R2010) |
G型槽銷 [Table 6]
Grooved Pins - Type G |
| 54 |
|
[航空] HB 858 - 1990 |
D型導正銷 |
標準編號 / Standard Code：
NF E 25-763 - 1997 (R2002)
中文名稱 / Chinese Name： 中部帶1/3全長平行溝槽的槽銷
英文名稱 / English Name： Grooved Pins. One-Third-Length Centre Grooved
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
中文名稱 / Chinese Name： 中部帶1/3全長平行溝槽的槽銷
英文名稱 / English Name： Grooved Pins. One-Third-Length Centre Grooved
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
Data Source:
YJT Fastener Database (164580.com)
Standard: NF E 25-763 - 1997 (R2002)
Chinese Name: 中部帶1/3全長平行溝槽的槽銷
English Name: Grooved Pins. One-Third-Length Centre Grooved
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
Standard: NF E 25-763 - 1997 (R2002)
Chinese Name: 中部帶1/3全長平行溝槽的槽銷
English Name: Grooved Pins. One-Third-Length Centre Grooved
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
© 易緊通 服務熱線：4006-164580（免長途費）